Load-bearing frames, platforms, stairs, roof trusses and equipment bases, fabricated at our Konya plant under EN 1090-2 with factory production control (FPC) and CE marking.
Fabricated to your structural design and shop drawings. Every member is traced by serial number; material certificates, WPS and NDT records are part of the delivery file. Members are fabricated at our Konya plant and shipped ready for erection; site erection itself is not part of our scope.
Columns, beams and portal frames for industrial warehouses and factory buildings. S235–S355 J2+N, EXC2/EXC3.
Roof trusses, space frames and purlins. Typical span 6–24 m.
Service platforms, mezzanines, gallery stairs and handrails, delivered ready to install with grating and treads.
Bases for process equipment, transformer and generator skids, conveyor supports; holes and plates prepared to the anchor plan.
PV mounting structures, wind-turbine service platforms, switchyard frames; optionally hot-dip galvanised.
Short-span footbridges, chimney internals, flue ducts and project-specific steel structures.
Our EN 1090-2 factory production control certificate covers execution classes up to EXC3. Execution class, material and acceptance criteria are fixed in writing at the quotation stage.
| Area | Scope |
|---|---|
| Standard and execution class | EN 1090-2 · EXC1–EXC3 · FPC |
| Structural steels | S235 · S275 · S355 J2+N |
| Welding | MIG/MAG · submerged arc (35 m line) · approved WPS · EN ISO 9606-1 welders |
| Acceptance criteria | EN ISO 5817 B/C (per execution class) |
| NDT | VT · PT · MT · UT (ISO 9712 L2) |
| Surface and connections | Sa 2½ blasting · C4–C5 paint or hot-dip galvanising · ISO 898 8.8/10.9 bolts with torque records |
Structural design and shop drawings are reviewed; execution class, weld details and the bill of materials are confirmed. Quote within 48 hours.
Sections and plates are sourced with EN 10204 3.1 certificates and heat numbers are matched to the part list. Cutting and drilling follow ArmaWeld's cutting plan.
Fabricated in fixtures by qualified welders to approved WPS; long seams on the 35 m submerged arc line. Every weld is traced to its welder and WPS.
NDT and dimensional checks are done in-house; DFT is recorded after blasting, painting or galvanising. The CE Declaration of Performance (DoP) and document file ship with the goods.
Customers in Turkey and across Europe who need certified steel structures under EN 1090:
EN 1090-2 is the mandatory production standard for placing steel structural components on the market with CE marking. EXC3 is the execution class for structures in the higher consequence class; ArmaWeld's certificate covers all classes from EXC1 to EXC3.
Production follows the customer's approved structural design and shop drawings. Our mechanical engineers review the shop drawings for manufacturability and weld details and propose weld detail and fixture improvements.
CE Declaration of Performance (DoP), EN 10204 3.1 material certificates, WPS/WPQR, welder certificates, NDT reports, dimensional report and paint or galvanising thickness records. The whole file also stays in the customer portal.
ISO 12944 C4–C5 paint systems after Sa 2½ blasting, or hot-dip galvanising. Surface treatment is carried out at partner facilities audited to ArmaWeld's specification; DFT measurements go into the document file.
Yes. Our EN 1090 FPC certificate and CE-marked production are suitable for the EU market. We serve export customers with an English document file, EXW or DAP delivery options and live tracking in the customer portal.
Send your structural design and shop drawings and receive a quote within 48 hours, including execution class, welding plan and document scope.